GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.
GuangDong Advanced Thermoplastic Polymer Technology Co., Ltd.

Low Shrinkage LSZH

Low Shrinkage LSZH

Meet the cable jackets requirements for very low shrinkage (≤5‰) under high temperature, low temperature, and high and low-temperature cycle conditions. Compared with conventional LSZH materials, the Defender-SCTM series is innovative in that it introduces polar polymers with excellent high and low-temperature resistance, which improves the compatibility of the inorganic flame retardant with the polyolefin composition, while greatly increasing the high and low-temperature resistance of traditional LSZH materials. It makes the material have an obvious improvement in high and low-temperature resistance, mechanical properties, and environmental resistance. It is an ideal jacket material for high-power transmission cables in areas with large ambient temperature changes.

1. Flame retardant:

Fully support optical fiber cable to pass IEC60331-1-2 single vertical burning test;

2. Excellent high and low-temperature resistance shrinkage:

High-temperature shrinkage: 4 hours of treatment at 85°C cycles, if cooled to room temperature, shrinkage ≤ 3‰;

Low-temperature shrinkage: 40 °C for 4 hours, shrinkage at low temperature ≤ 3‰;

High and low-temperature cycle shrinkage: maintained at 85°C for 4 hours, and then reduced to -40°C for 4 hours, after two cycles, the maximum shrinkage at -40°C ≤ 5 ‰.

3. Better processing:

Fully meet the optical cable high-speed extrusion (≥150m/min), the wire diameter is round and stable, less flow, good color stability, higher yield rate. The product batch stability and uniformity are guaranteed.

Technical Data of Low Shrinkage LSZH

Technical Data SheetModel
ItemsMaterial PropertiesTest StandardTest ConditionUnit5622G--EBT-0004G
Physical CharacteristicsHardnessISO 4815SShore A
ProportionISO 1183-g/cm³
Brittle TemperatureISO 812-
Mechanical PropertiesTensile StrengthICE 60811-501200mm/min%
ElongationICE 60811-501200mm/minMpa
Hot Air AgingTensile Strength Retention RateISO37:2017-%
Elongation Retention RateISO37:2017-%
Electrical PerformanceVolume ResistivityASTM D257-Ohm-cm
Dielectric StrengthASTM D150--
Combustion PerformanceVertical Burning TestUL 943.0/6.0mm-
Oxygen IndexASTM D2863-%
Feature





Key Benefits of Low Shrinkage LSZH

Key Benefits of Low Shrinkage LSZH

· Competitive price      · Respond immediately      · Strong R&D capability      · Excellent after-sales service

Inquiry
Please fill in the below informations if you have any questions or doubts, ATP Polymer will contact within 24 hours.
Name
Email
Contact No
Country
Product type
Application type
Enquiry Message
Low Shrinkage LSZH

ATP Polymer News Recommendation

14 Jun, 2025
Application Analysis of TPU Heat Resistance
Overview of TPU Heat ResistanceTPU is a thermoplastic elastomer that structurally lies between rubber and plastic, featuring a microphase separation structure with hard segments (typically polyurethan...
07 Jun, 2025
Basic Process and Core Mechanisms of TPO Injection Molding
In the modern plastic processing industry, TPO injection molding is emerging as an efficient and widely used manufacturing process, showcasing its unique value across various sectors including automot...
31 May, 2025
Revealing the TPO Chemical Structure
In the world of polymer materials, structure dictates performance. TPO, as a composite material with both rigidity and flexibility, is widely used in automobiles, construction, medical devices, and ap...
24 May, 2025
Importance of TPE Cable Jacket
In this highly digitized and electrified era, cables have deeply penetrated our lives and industrial systems. From smart homes to high-end medical equipment, from automotive wiring harnesses to indust...
17 May, 2025
TPO Material Properties: A Versatile Performer Balancing Rigidity and Flexibility
With the continuous pursuit of lightweight, high-performance, and environmentally friendly materials in modern manufacturing, thermoplastic polyolefins are gradually becoming an important polymer mate...
10 May, 2025
TPU Plastic Properties: A "Universal Material" that Combines Flexibility and Strength
In modern polymer materials, TPU plastic is highly favored for its unique combination of properties. From sports shoe soles to wearable devices, from automotive components to mobile phone cases, TPU i...